Autopilot and Flight Control Firmware Layer
Agno Horizon Core is the embedded software layer that runs on the flight control board and manages the vehicle's sensing, estimation, control and communication functions. The autopilot enables the vehicle to follow a defined route without pilot intervention, maintain its altitude and speed, and execute mission steps in sequence.
What Does UAV Autopilot Software Do?
Autopilot software is embedded software that manages the flight of an unmanned vehicle with defined rules and control algorithms. Flight control firmware is the complete body of this software running on the hardware.
The firmware reads sensors at specific frequencies, estimates the vehicle's state by fusing the data, generates motor and servo commands through nested control loops, and reports all these processes to the ground control station as telemetry. Mission plans, flight modes and safety behaviors are also defined in this layer.
Agno Horizon Core is developed with a layered architecture: hardware-dependent drivers are kept in the lower layer, and control and mission logic are abstracted from the hardware. This approach makes it easier to adapt the same software core to different boards and platforms.
Core Components of the Firmware
State Estimation
Fusing IMU, barometer, magnetometer and GNSS data to produce attitude, velocity and position information.
Control Loops
Cascaded control structure for attitude, velocity and position; control parameters tunable to platform dynamics.
Flight Modes
Defined flight modes from manual and stabilized to automatic mission, position hold, return and landing.
Failsafe Management
Defined safe behaviors in situations such as communication loss, low battery, GNSS loss and sensor inconsistency.
Parameter Management
Reading, changing and saving control, sensor and safety settings through the ground control software.
Logging and Analysis
Recording flight data; enabling post-flight performance and event analysis.
Simulation-Based Development
In firmware development, changes are first validated in a simulation environment. With software-in-the-loop (SITL) simulation, control logic, mission flow and failsafe behaviors are tested without putting a real vehicle at risk. Footage from a SITL flight test performed with Agno Horizon GCS is available on the GCS page.
- SimulationValidating control and mission logic in a SITL environment
- Bench TestSensor, output and communication tests on the board
- Controlled FlightParameter tuning and behavior validation
Horizon Core and Other Components
| Hardware It Runs On | Agno Horizon flight control board |
|---|---|
| Ground Segment | Mission, parameter and telemetry management via Agno Horizon GCS |
| Upper Layer | Autonomous mission and image processing integration with the flight control computer |
| Protocol | MAVLink-based telemetry and command |
| Download | Current versions of Agno Horizon software on the download page |
Questions and Answers
What is UAV autopilot software?
It is embedded software that manages the flight of an unmanned vehicle with control algorithms and defined rules. It enables the vehicle to follow its route, maintain altitude and speed, execute mission steps and behave safely in unexpected situations.
What is the difference between firmware and autopilot?
Firmware is the entire software running on the flight control board: it includes the driver, estimation, control, mission and communication layers. Autopilot refers to the functions of this software that automatically manage the flight.
What is Agno Horizon Core?
Agno Horizon Core is the name of the autopilot and firmware layer that AGNOBİL develops for the Agno Horizon flight control board.
How is a firmware update performed?
Firmware and parameter operations are carried out through the ground control software. Current software versions are available on the Agno Horizon download page.
Can it be adapted to different platforms?
Thanks to the layered architecture, control and mission logic are abstracted from the hardware; control parameters and flight modes can be adapted to platform dynamics.
Related Technologies
Flight Control Board
The vehicle's real-time control hardware with domestic PCB design and sensor integration.
Explore →Agno Horizon GCS
Mission planning, telemetry and vehicle management software.
Explore →Flight Control Computer
Onboard computing unit for mission, autonomy and image processing.
Explore →Autonomous Control
Mission-based autonomy and safe-state management.
Explore →Let's Talk About Your Autopilot and Firmware Needs
Share your platform and mission scenario, and let our embedded software team carry out a technical evaluation.