Autonomous Control Systems for Unmanned Vehicles
Autonomous control is the ability of an unmanned vehicle to carry out its assigned mission by evaluating its environment and its own state, without needing continuous operator intervention. In the Agno Horizon architecture, AGNOBİL treats autonomy not as a single algorithm but as a system in which the sensing, decision, control and safety layers are designed together.
What Is an Autonomous Control System?
An autonomous control system is the software architecture that decides "what" the vehicle will do and "how" it will do it, based on mission rules and real-time data.
The flight control board provides the vehicle's stability and basic movement; the autonomy layer runs on top of it. It sequences the steps in the mission plan, evaluates sensor and payload data, changes the route or behavior when necessary and reports results to the ground station. In Agno Horizon, this layer runs on the flight control computer, separately from the safety-critical control loop.
From Remote Control to Mission Autonomy
| Remote Control | The operator steers the vehicle directly; the system provides balance and stabilization support. |
|---|---|
| Assisted Control | The operator's workload is reduced with functions such as position and altitude hold. |
| Route Autonomy | The vehicle automatically follows the pre-planned route and mission steps. |
| Mission Autonomy | The vehicle adapts its behavior during the mission based on sensor data; critical decisions are submitted for operator approval. |
| Collaborative Autonomy | Multiple platforms move in coordination through a common mission picture (WAIA R&D goal). |
Architectural Rules for Reliable Autonomy
Layer Separation
Decision and mission software is separated from the safety-critical control loop. An error in the upper layer does not affect the vehicle's basic control.
Defined Safe States
Predefined behaviors (loiter, return, land, stop) exist for communication loss, position loss or unexpected situations.
Human-in-the-Loop Control
Autonomy is designed not to take the operator out of the loop but to reduce their workload. Critical decisions can be tied to operator approval.
Validation Through Simulation
Autonomous behaviors are validated first in a simulation environment and then under controlled field conditions.
Autonomy on Aerial, Ground and Maritime Platforms
Unmanned Aerial Vehicles
Route following, area survey, target tracking, autonomous takeoff and landing missions.
Unmanned Ground Vehicles
Route following, stopping or replanning when obstacles occur, patrol missions.
Unmanned Surface Vehicles
Route and station keeping, area surveillance and patrol missions.
Questions and Answers
What is an autonomous control system?
It is the combination of sensing, decision and control software that enables an unmanned vehicle to carry out its assigned mission by evaluating its environment and its own state, without needing continuous operator intervention.
What is the operator's role in an autonomous vehicle?
In the Agno Horizon approach, autonomy is designed to reduce the operator's workload. Mission definition, approval of critical decisions and switching to manual control when necessary remain under the operator's authority.
Does autonomy run on the flight control board?
The basic control loop runs on the flight control board, while the mission and decision layer runs on the flight control computer. This separation increases safety.
Can the same autonomy approach be used on ground and maritime vehicles?
Mission management, the decision layer and the communication architecture can be designed in common across domains, while platform-specific motion control is adapted separately for each vehicle type.
Related Technologies
Flight Control Computer
Onboard computing unit for mission, autonomy and image processing.
Explore →Target Detection and Tracking
Target tracking with image processing and gimbal control.
Explore →Communication & Command Control
Data link, network architecture and multi-domain command and control.
Explore →WAIA
A joint command R&D project for aerial, ground and maritime platforms.
Explore →Let's Talk About Your Autonomy Project
Share your platform and target level of autonomy, and let's evaluate our architectural approach together.