+90 850 242 96 90

UAV Flight Control Computer

Agno Horizon · Onboard Computing

Onboard Flight Control Computer for Missions and Autonomy

In modern unmanned systems, flight control is handled in two layers: the flight control board, which keeps the vehicle stable within milliseconds, and the flight control computer, which runs the mission, autonomous decisions and image processing. In the Agno Horizon architecture, AGNOBİL is developing a structure that connects these two layers through defined interfaces.

  • Mission computer
  • Companion computer
  • Autonomous decision layer
  • Image processing
  • Data fusion
  • MAVLink
Definition

What Is a Flight Control Computer?

The flight control computer is a computing unit that runs on the unmanned vehicle, has more processing power than the flight control board and runs mission-level software.

While the flight control board answers the question "how do I fly the vehicle?", the flight control computer focuses on "how do I complete the mission?". It processes data from cameras and payload sensors, runs autonomous mission logic and sends target position, velocity or attitude commands to the flight control board.

This separation isolates safety-critical real-time control from complex application software. Even if an application on the mission computer fails, the flight control board maintains its defined safe behavior.

Division of tasks between the flight control computer and the flight control boardThe flight control computer runs the mission, autonomy and image processing layer; the flight control board runs the real-time control layer. FLIGHT CONTROL COMPUTER Mission management Autonomous decision Image processing Data fusion · logging · application software Flight control board + Horizon Core Real-time stability, navigation and failsafe Camera / gimbal Payload sensors Data link / modem Ground control station Motor / servo MAVLink / serial communication Conceptual architecture illustration.
Division of tasks between the mission layer (flight control computer) and the real-time control layer (flight control board).
Functions

Tasks Handled by the Flight Control Computer

Mission Management

Step-by-step execution of the mission plan, condition-based mission changes and reporting of mission status to the ground station.

Image Processing

Processing the camera stream onboard; running applications such as target detection and tracking.

Autonomous Decision Layer

Running decision logic based on sensor and mission data; generating target commands for the flight control board.

Data Fusion and Transmission

Combining payload data with telemetry, recording it and transmitting it over the data link.

Architectural Principle

Separating Safety-Critical and Application Layers

Defined Interface

The flight control computer and the flight control board communicate via MAVLink messages. The mission layer can only send defined commands; it has no direct access to the inner workings of the control loop.

Independent Safe State

If commands from the mission computer stop or become invalid, the flight control board is configured to switch to a predefined safe behavior (loiter, return, land).

Application Areas

Where Is It Needed?

AGNOBİL carries out flight control computer software and integration work within the Agno Horizon R&D program. Hardware is selected per project based on processing power, weight, power consumption and payload requirements.
Frequently Asked Questions

Questions and Answers

Are the flight control computer and the flight control board the same thing?

No. The flight control board provides the vehicle's stability and basic flight in real time. The flight control computer runs high-level tasks such as mission management, image processing and autonomous decision-making, and sends commands to the flight control board.

Why is a mission computer (companion computer) used?

Image processing and autonomous decision algorithms require more processing power than a flight control board can provide. Running these tasks on a separate computer protects the safety-critical control loop.

How do the flight control computer and the board communicate?

In the Agno Horizon architecture, the two units communicate via MAVLink messages over a serial or network connection.

What hardware is used?

Hardware is determined per project based on processing power, weight, power consumption and payload requirements. AGNOBİL handles the software layer and integration.

Horizon Ecosystem

Related Technologies

Planning a Mission Computer Integration?

Share your payload and autonomy goals, and let's evaluate our architecture proposal together.

Go to the contact form

Contact Us About the Flight Control Computer

    Please fill out the message section as clearly and detailed as possible.

    Alternatively, you can send an email to [email protected].