+90 850 242 96 90

Autonomous Control Systems – Unmanned Vehicle Autonomy

Agno Horizon · Autonomy

Autonomous Control Systems for Unmanned Vehicles

Autonomous control is the ability of an unmanned vehicle to carry out its assigned mission by evaluating its environment and its own state, without needing continuous operator intervention. In the Agno Horizon architecture, AGNOBİL treats autonomy not as a single algorithm but as a system in which the sensing, decision, control and safety layers are designed together.

  • Mission-based autonomy
  • Decision layer
  • Safe state
  • Human-in-the-loop
  • Air · land · sea
Autonomous control loop01SenseSensor and mission data02AssessState and risk analysis03DecideMission rules04ActControl commands05MonitorVerification and reportingConceptual autonomy loop illustration.
The autonomous control loop that repeats continuously from sensing to reporting.
Definition

What Is an Autonomous Control System?

An autonomous control system is the software architecture that decides "what" the vehicle will do and "how" it will do it, based on mission rules and real-time data.

The flight control board provides the vehicle's stability and basic movement; the autonomy layer runs on top of it. It sequences the steps in the mission plan, evaluates sensor and payload data, changes the route or behavior when necessary and reports results to the ground station. In Agno Horizon, this layer runs on the flight control computer, separately from the safety-critical control loop.

Levels of Autonomy

From Remote Control to Mission Autonomy

Remote ControlThe operator steers the vehicle directly; the system provides balance and stabilization support.
Assisted ControlThe operator's workload is reduced with functions such as position and altitude hold.
Route AutonomyThe vehicle automatically follows the pre-planned route and mission steps.
Mission AutonomyThe vehicle adapts its behavior during the mission based on sensor data; critical decisions are submitted for operator approval.
Collaborative AutonomyMultiple platforms move in coordination through a common mission picture (WAIA R&D goal).
Design Principles

Architectural Rules for Reliable Autonomy

Layer Separation

Decision and mission software is separated from the safety-critical control loop. An error in the upper layer does not affect the vehicle's basic control.

Defined Safe States

Predefined behaviors (loiter, return, land, stop) exist for communication loss, position loss or unexpected situations.

Human-in-the-Loop Control

Autonomy is designed not to take the operator out of the loop but to reduce their workload. Critical decisions can be tied to operator approval.

Validation Through Simulation

Autonomous behaviors are validated first in a simulation environment and then under controlled field conditions.

Cross-Domain

Autonomy on Aerial, Ground and Maritime Platforms

Unmanned Aerial Vehicles

Route following, area survey, target tracking, autonomous takeoff and landing missions.

Unmanned Ground Vehicles

Route following, stopping or replanning when obstacles occur, patrol missions.

Unmanned Surface Vehicles

Route and station keeping, area surveillance and patrol missions.

Autonomous control systems are among AGNOBİL's R&D and competence areas within Agno Horizon. The level of autonomy, safety requirements and validation criteria are defined separately for each project.
Frequently Asked Questions

Questions and Answers

What is an autonomous control system?

It is the combination of sensing, decision and control software that enables an unmanned vehicle to carry out its assigned mission by evaluating its environment and its own state, without needing continuous operator intervention.

What is the operator's role in an autonomous vehicle?

In the Agno Horizon approach, autonomy is designed to reduce the operator's workload. Mission definition, approval of critical decisions and switching to manual control when necessary remain under the operator's authority.

Does autonomy run on the flight control board?

The basic control loop runs on the flight control board, while the mission and decision layer runs on the flight control computer. This separation increases safety.

Can the same autonomy approach be used on ground and maritime vehicles?

Mission management, the decision layer and the communication architecture can be designed in common across domains, while platform-specific motion control is adapted separately for each vehicle type.

Horizon Ecosystem

Related Technologies

Let's Talk About Your Autonomy Project

Share your platform and target level of autonomy, and let's evaluate our architectural approach together.

Go to the contact form

Contact Us About Autonomous Control Systems

    Please fill out the message section as clearly and detailed as possible.

    Alternatively, you can send an email to [email protected].