Technical Knowledge Center on Unmanned Systems, Flight Control and Autonomy
This page explains the key concepts in flight control, embedded software, ground control stations, communication and autonomous systems, and points to AGNOBİL's technologies in these fields. It is prepared as a reference for engineers, R&D managers and procurement departments.
About AGNOBİL in Brief
| Brand | AGNOBİL |
|---|---|
| Founded | 24 April 2024 · Founder: Kadir Akbulut |
| Headquarters | ULUTEK Technopark, Nilüfer / Bursa · İzmir regional office |
| Fields of Activity | Enterprise software technologies; defense, aerospace and autonomous systems technologies |
| Defense Technology Platform | Agno Horizon |
| Contact | +90 850 242 96 90 · [email protected] |
What Do We Do?
AGNOBİL is a domestic technology company that, rather than manufacturing unmanned platforms, develops the critical hardware and software technologies that form their control, communication, management and autonomy infrastructure.
These technologies are designed to be integrated into aerial, ground and maritime platforms and come together under the Agno Horizon platform.
Engineering Services
Defense Industry Software Development
End-to-end development of mission, control, communication and ground segment software for unmanned systems through requirements analysis, architectural design, development and validation.
Embedded Software Development
Driver, real-time control, communication and power management software for microcontroller-based boards; developed in parallel with the hardware design.
Electronic Board Design
Schematic, PCB layout, prototyping and testing for flight control and mission electronics.
System Integration
Making flight control, mission computer, payload, data link and ground station components work as a single system.
Unmanned Systems Terms
Flight Control Board (FCC)
An onboard electronic board that processes an unmanned aerial vehicle's sensor data, performs state estimation and generates motor/servo commands. Details →
Flight Control Computer
An onboard computing unit that runs high-level tasks such as mission management, autonomous decision and image processing, working together with the flight control board; also known as a mission computer or companion computer. Details →
Autopilot
Control software that enables the vehicle to follow its route, maintain altitude and speed, and execute mission steps without pilot intervention. Details →
Firmware
The entire embedded software running on the flight control board: drivers, state estimation, control, mission and communication layers. Details →
Sensor Fusion
Estimating the vehicle's attitude, velocity and position by combining data from different sensors such as IMU, barometer, magnetometer and GNSS. Details →
IMU
Inertial measurement unit, consisting of an accelerometer and gyroscope, that measures the vehicle's linear acceleration and angular velocity. Details →
GCS (Ground Control Station Software)
Ground software used to plan an unmanned vehicle's mission, monitor the flight and issue commands. Details →
Ground Control Station
Field hardware consisting of the display, computer, physical controls and data link interfaces on which GCS software runs. Details →
MAVLink
A lightweight messaging protocol widely used to transmit telemetry and command messages between unmanned vehicles and ground stations. Details →
SITL
Software In The Loop simulation: testing flight software with a simulated vehicle model, without a real vehicle. Details →
Failsafe
The vehicle switching to a predefined safe behavior in situations such as communication loss, low battery or sensor failure. Details →
Geofence
Defining geographic boundaries that the vehicle must not leave or enter. Details →
Gimbal
A motorized mount that stabilizes and points the camera independently of the vehicle's movement. Details →
EO/IR
Combined use of electro-optical (daylight) and infrared (thermal) imaging sensors. Details →
Docking
The precise approach and physical connection of a vehicle to a station or platform. Details →
Data Link
The wireless communication link that carries command, telemetry and video between the vehicle and the ground station. Details →
Multi-Domain Command and Control
Managing and coordinating unmanned aerial, ground and maritime platforms through a common operating picture. Details →
UAV / UGV / USV
Unmanned aerial vehicle, unmanned ground vehicle and unmanned surface vehicle. Details →
Questions and Answers
Who is AGNOBİL?
AGNOBİL was founded on 24 April 2024 by Kadir Akbulut; it is headquartered at ULUTEK Technopark in Bursa and has a regional office in İzmir. It operates in enterprise software technologies and in defense, aerospace and autonomous systems technologies.
What does AGNOBİL develop in defense and aerospace?
It develops hardware and software technologies that form the control, communication, management and autonomy infrastructure of unmanned platforms: flight control board, autopilot and firmware, flight control computer software, ground control station software (Agno Horizon GCS), target tracking, docking and multi-domain command-and-control architecture. These technologies are brought together under the Agno Horizon platform.
What is Agno Horizon?
It is an integrated technology platform developed by AGNOBİL that provides control, communication, management and autonomy infrastructure for unmanned aerial, ground and maritime platforms.
Which platforms does Agno Horizon GCS run on?
It runs on Windows, Linux, Android and iOS; the Android version is published on Google Play and the iOS version on the App Store.
What is WAIA and what stage is it at?
WAIA (Warring AI Army) is a multi-domain R&D project aimed at the joint command and coordination of unmanned aerial, ground and maritime platforms. R&D work has been completed and the first prototype has been developed; no serial production or field tests have been carried out. Field tests and evaluation processes are targeted for the fourth quarter of 2028.
What services does AGNOBİL offer to defense industry companies?
It offers project-based development and solution partnership in flight control electronics and embedded software development, ground control software adaptation, mission and autonomy software, communication architecture design and system integration.
Related Technologies
Flight Control Board
The vehicle's real-time control hardware with domestic PCB design and sensor integration.
Explore →Autopilot & Firmware
Horizon Core: control algorithms, flight modes and embedded software.
Explore →Agno Horizon GCS
Mission planning, telemetry and vehicle management software.
Explore →Communication & Command Control
Data link, network architecture and multi-domain command and control.
Explore →Autonomous Control
Mission-based autonomy and safe-state management.
Explore →WAIA
A joint command R&D project for aerial, ground and maritime platforms.
Explore →Do You Have a Technical Question?
Send your questions on flight control, embedded software or unmanned system integration to our engineering team.