+90 850 242 96 90

Unmanned Systems Communication Infrastructure and Multi-Domain Command and Control

Agno Horizon · Communication and Command Control

Communication Infrastructure and Multi-Domain Command and Control for Unmanned Systems

The value of an unmanned system in the field is measured by how reliably data can be received from it and how reliably commands can be sent to it. Within Agno Horizon, AGNOBİL is working on a communication architecture that starts with the data link between the vehicle and the ground station and unites multiple ground stations and platforms in different domains in a common command structure.

  • Data link
  • Telemetry
  • Video transmission
  • MAVLink
  • Inter-ground-station network
  • Common operating picture
Multi-domain unmanned systems command-and-control networkNetwork structure in which aerial, ground and maritime platforms are connected to ground control stations and a common command center via data links. Joint command centerCommon operating picture · task assignment Ground station AAerial missions Ground station BGround missions Ground station CMaritime missions UAV UGV USV Data linkData linkData linkCross-platformCross-platform Conceptual network architecture illustration.
Multi-domain architecture in which aerial, ground and maritime platforms connect to a joint command center via data links and ground stations.
Communication Layers

Data Flow from the Vehicle to the Command Center

Command-and-Control Channel

The channel through which mission, mode change and control commands are sent to the vehicle, with reliability as the highest priority. On link loss, the vehicle switches to a defined safe behavior.

Telemetry

Transmission of position, altitude, speed, energy and system status to the ground station. Agno Horizon components communicate using the MAVLink protocol.

Video and Payload Data

Transmission of camera imagery and payload data over the high-bandwidth channel.

Inter-Ground-Station Network

Multiple ground stations sharing the same mission picture; mission handover and joint operations.

Multi-Domain Command and Control

Joint Command for Aerial, Ground and Maritime Vehicles

Unmanned platforms in different domains usually work with different control systems, ground stations and communication infrastructures. Multi-domain command-and-control architecture aims to eliminate this fragmentation: the position and status of all platforms are combined in a common operating picture, missions are assigned through this picture, and platforms can take over each other's missions when needed.

Common Data Model

Representing the status of aerial, ground and maritime vehicles with the same data model; ground stations working independently of platform type.

Mission Coordination

Distributing missions across domains, priority management and cross-platform mission handover.

Resilient Communication

Mission continuity through local autonomy during link interruptions; synchronizing the state when the link is restored.

Human-in-the-Loop Decision

Keeping task assignment and critical decisions under operator authority at the command center.

This approach forms the basis of AGNOBİL's multi-domain R&D project WAIA – Warring AI Army.

Field Components

Hardware Supporting Communication

In the ground segment, data link continuity is addressed together with the antenna system, ground control station and modem compatibility. The auto-tracking UAV antenna system, the long-range HD video and data transmission system and the ground control stations, developed with our solution partners, are the field components of this structure.

Multi-domain command-and-control architecture is one of AGNOBİL's R&D areas. Communication bands, ranges and security requirements are determined according to project and regulatory conditions.
Frequently Asked Questions

Questions and Answers

What does communication infrastructure cover in unmanned systems?

It covers the command-and-control channel, telemetry, video and payload data transmission, and network connections between ground stations. Each channel has different reliability and bandwidth needs.

What is multi-domain command and control?

It is managing unmanned aerial, ground and maritime platforms through a common operating picture, distributing missions across domains and ensuring coordination between platforms.

Which protocol does Agno Horizon use?

Agno Horizon components communicate between the vehicle and the ground station using the MAVLink protocol.

What happens when the link is lost?

The vehicle switches to a predefined safe behavior or continues its mission with local autonomy; when the link is restored, status information is synchronized with the ground station.

Horizon Ecosystem

Related Technologies

Let's Design Your Command-and-Control Architecture Together

Share your platforms, communication infrastructure and operating model, and let our technical team evaluate them.

Go to the contact form

Contact Us About Communication and Command Control

    Please fill out the message section as clearly and detailed as possible.

    Alternatively, you can send an email to [email protected].